Tube To Tube Sheet Joint
The New Field Industries (as Shown in Figure 1) are designed to remove entrained liquids from a gas stream. The minute liquid droplets (0.3μ-10μ) in the gas stream are coalesced (as shown in Figure 2) in the high efficiency coalescing elements into large droplets which drain off the outside surface of the elements.

Any large liquid droplets (>10 μ) will gravity out in the lower sump. The vertical gas coalescers have a removal efficiency of  99.99+% by weight of all liquid down to 0.3 microns.

The Coalescer elements manufactured by Southwest Filter Compnay are Designed specifically to remove minute liquid droplets from a gas strem. The elements are designed for high efficiency and constructed from the smallest diameter micro fibers available. This special construction enables our elements to offer removal efficiencies of 99.99=% down to 03. Microns. Additionally , the coalescer elements are manufactured with a graded density to yield the maximum service life.

An added feature of the coalesce elements is that no gaskets, bolts, springs or nuts are required for sealing. The elements are self sealing and, therefore, time required for element change out is greatly reduced. The coalesce elements have no metal components, thereby making disposal less costly.
 
APPLICATIONS
Typical applications for the southwest Filter Company Vertical Gas Coalescers:
  » Gas pipelines to remove liquid condensate
  » Upstream of compressors and turbines to remove liquids and solids to prevent damage to expensive equipment.
  » Downstream of compressors to remove compressor lube oil from the gas
  » Upstream of gas metering stations to ensure correct measuring.
  » Fuel gas applications to prevent damage to compressors
  » Enhanced oil recovery to reduce formation damage from entrained liquids and solids in the gas.
 
Other Produsts by New Field Company…
  » Gas Filter /Separators   » Activated Carbon Filters
  » Liquid/Liquid Coalescers   » Amine/Glccol Filters
  » Fual Gas Filtration Skids   » Production Separators
  » Gas Filters   » Test Separators
  » Liquid Filters      
Contact Factory For Additional information.
E-W-S Vane TYPE MIST EXTRACTING UNIT
E-W-S Vane TYPe Mist Extracting Units are furnished with removable or non-removable vanes, designed for installation during fabrication or through the manway of an exitsting vessel, furnished in carbon or stainless steel.
Filters, Separators & Coalescers*
For Finished Petroleum Liquids, Gases, Air and Water Featuring moulded, tubular fiber Glass Filter Elements That require no cumbersome gaskets, threads or springs.
Four model 363-C Filter / Separators installed ar a large south Texas refinery for removing solids water “cloud” from diesel furnace oil and other finished products, being delivered to pipeline.

Two units are old style with full-face flanges for making element changes, and two are new style, with quick-opening elliptical flanges on one side and one end for making an element change.
 
 
Filtration and Complete Free Water Removal From Finished Products
Model 302-C Filter/Separator two-stage Unit, 150# ASME code stamped, for removing solids and water from 500 GPM of kerosene at pipeline terminal.
Unit employs fiber glass filter elements and fiber glass water coalescing elements Quick –opening elliptical flanges for making element changes Entry
into unit not required Unit also equipped with automatic air eliminator.

NEW FIELD Mfgr. Steam Jet Ejector & Process Equipments Office: 702, Yashkamal, Syajigunj, Baroda-390 005. Ph:(91-265)-2361834, (91-265)-2362921, Fax: (91-265)-2361235 BUREAU VERITAS Certification ISO Model 303 Filter/Separator three – stage unit, 150# ASME code stamped, for removing solids and water from 600 GPM of diesel at loading rack/ Thirdstage hydrophobic separator elements assure complete water removal and are required for diesel and heavier products.

Fiber Glass Filter Elements With a Greatly increased surface area, giving long element life, Easy to change, too ---- just pull off the old Elements and shove on new ones.
REMOVAL OF SMALL QUANTITIES OF OIL FROM WATER
All Units can be equipped with automatic oil dump valve, air eliminator dump heater discharge control valve and liquid level gage.

Model 162-WC Filter/ Separator installed at a west Texas chemical plant for removing small quantities of entrained oil from 77 GPM of steam condensate. Unit equipped with one-bolt, quick-opening elliptical flanges for changing elements.
COMPLETE REMOVAL OF ENTRAINED LIQUIDS AND SOLIDS FROM GAS
Negligible Pressure drop Through All units

Two model 362-GC Filter/Separators installed at a west Texas plant, 1200# ASME code stamped. Each unit removes traces of heavy distillate 88 MM SCFD of natural gas. Elliptical Manway flanges equipped with hinges for ease in handling.
FILTERS, SEPARATORS AND COALESCERS FOR
REFINERIES LOADING RACKS GASOLINE PLANTS
PRODUCTS PIPELINES POWER PLANTS CYCLING PLANTS
GAS PIPELINES CHEMICAL PLANTS LPG STORAGE SYSTEMS
CUSTOM DESIGNS
  » Materials ASME Construction
  » Ferrous and Non-ferrous Materials
The Southwest fiberglass Filter Tube is a moulded Product with a phenolic resin bonding agent The Tube is Suitable for filter any liquid or gas that does not chemically attack the glass or phenolic binder. The standard socking textile is cotton. Other textiles are available if desired.
Partial perforations are ground into the outer surface of the tube to increase the surface area and from solids retention traps, thereby greatly extending the life of the tube. This unique sealing arrangement means that no gaskets, springs or bolts are involved and a tube change-out can made very quickly.

An extremely important advantage of the socked filter tube is the pressure drop it can withstand, up to 500 psi, without rupture or by-pass. This feature eliminates usual problem of premature tube rupture followed by product recontamination and media migration.
Interchangeable 1 micron thru 50 micron tubes available. To change-out filter tubes simply pull out old tubes and shove in new ones. No gaskets, bolts or springs involved.
LIQUIDS AND SOLIDS REMOVAL
FROM GAS
SOLIDS REMOVAL FROM DRY GASES SOLIDS REMOVAL FROM DRY GASES
Interchangeable 1 micron Thru 50 Micron Cartridges TWO-STAGE VERTICAL FILTER/SEPARATORS Interchangeable 1 micron Thru 50 Micron Cartridges
 
 
Designed & Developed by : SPIKYarc